Water Conditioning Systems

Water Storage Tanks (Including Cisterns) and In-Ground Wells

In order to better evaluate your needs and offer a Pricing Model, we would need to know the following: 

AquaSmarter/AquaSmarter Well Systems Introduction:

AquaSmarter/AquaSmarter Potable Well Systems can operate either in a sediment collection tank environment or to be placed directly into the well below the submersible pump.  This document will explain both, in detail, so that you, the customer may decide what installation is best for you.  AquaSmarter/AquaSmarter Systems are highly efficient and only need to be replaced every twelve to twenty-four months (depending on which System you prefer).  We suggest you contract an independent water quality control laboratory to take samples of the Water Source before treatment.  When the initial testing is complete we will ask for the results to compare the results from an independent testing laboratory every two weeks for two months after installing your AquaSmarter/AquaSmarter Water Conditioning System.  The initial laboratory testing will provide us with the type and amount of contamination we are eliminating and from this analysis, we can better design and build a system to meet those needs. 

The four factors of information that are required to design and build the system are:

Four factors for Potable Water Tank or Cistern Reserve Systems

1. PH

2. Bacteria level or other contaminates

3. Tank Storage Volume

4. Approximate Water Usage per day

Three Factors for In-Ground Well Systems

Note; In a Well environment we will use the flow per min to calculate the formula with

1. PH

2. Bacteria level or other contaminates

3. Approximate Water Usage per day

The above information is necessary in order for us to design and build the correct AquaSmarter/AquaSmarter Water Conditioning System to better solve the problems of contamination.

How AquaSmarter/AquaSmarter Works

The proprietary AquaSmarter/AquaSmarter Ionizing Water Conditioning System uses small quantities of interactive ion-producing elements of carefully balanced Minerals (Silver, Copper, Zinc, Carbon, and Palladium) which when submerged in (fresh) water, releases Negatively Charged sub-atomic Particles which consequently charges each Water Molecule by this electrochemical process commonly known as electrolysis or “Galvanic Action.”  Concentrated (safe) levels of these Negatively Charged Particles seek out and destroy harmful Micro-Organisms as well as attracting Dirt, Dust and Metal Contaminants such as Iron, while coagulating and precipitating these molecules to the bottom of the water.  This process produces a crystal clear Environment.

Archeological excavations show, that people have been using copper for more than 11, 000 years and have been using silver for more than 5000 years.  Copper can be easily extracted and processed.  Over 7000 years ago, people developed a copper extraction mechanism for copper ores.  The Roman Empire gained most of its copper from Cyprus, the isle that gave copper its name.  Nowadays copper is mainly extracted form ores, such as cuprite (CuO₂), tenorite (CuO), malachite (CuO₃·Cu(OH)₂), chalcocite (Cu₂S), covelite (CuS) and bornite (Cu₆FeS₄).  Large deposits of copper ores have been found throughout the US, Chili, Zambia, Zaïre, Peru and Canada.  Silver can be obtained from pure deposits, from silver ores such as argenite (Ag₂S) and horn silver (AgCl) and combined with ore deposits that contain lead, gold or copper.  Both copper and silver have been applied for centuries because of their biocide mechanism. Modern ships still use the same technology. 

Because of this measure, ships can reach their destination faster.  Nomads were known to use silver coins to improve drinking water quality.  Well water containing copper and silver coins were also used due to the biocide affect of these metals.  Since 1869 various publications have appeared on the disinfection properties of silver.  Some European and Russian villages have been using silver for drinking water treatment for many years.  Copper-silver ionization was developed in both Europe and the United States in the 1950’s.

Common Questions we have encountered

Question: What is an Ion? 

Answer: Ions are Negatively charged atoms that also attract Dirt, Dust, Debris, and metals like Iron and coagulate the attracted these suspended molecules and precipitate them to the Bottom of the Pool or Water Tank/Reservoir.  This constant cleaning process leaves your Pool, Spa, Fountain or Water Tank Crystal Clear and Bacterial free.

Question: What is Ionization?

Answer: The release of silver and copper Ions.

Question: How does Ionization work? 

Answer: A safe low voltage self generating current is applied to the silver & copper electrodes.  As the ions attempt to move from one electrode to the other, many of them become suspended in the water.

Question: How does silver / copper ionization Condition water?

Answer: Copper ions have the ability to pierce the protective outer membrane of a cell and disrupt enzyme balance..  Silver is effective because of its capabilities of interfering with DNA production and accelerating the death phase of bacteria and viruses.   A multitude of scientific tests have been done proving the effectiveness of copper silver ion systems in and spa applications.  Experimentation at the University of Arizona proves that such mineral ions, in conjunction with trace chlorine are 1,000 times more effective than chlorine alone.  Today, the use of these metals is widespread and highly advanced as is the equipment used to produce them for water treatment.

Question: Is ionization all that you need for your water?

Answer: Silver & copper ionization completely Conditions water.  It is usually necessary to add a small amount of an oxidizing agent (chlorine or non-chlorine shock) periodically to help break down excess organic debris, and oils.

Question: Is ionization safe?

Answer: Not only is it safe, but the minerals used for water Conditioning are recognized as essential minerals to the body.

Question: How is ionization safer than chemicals?

Answer: Most, if not all of the chemicals used to Condition water are caustic and or toxic of which, many are now considered to be Carcinogenic.

Question: How is ionization better than chemicals?

Answer: The need for high levels of chemicals is eliminated.  Also eliminated are the strong chemical odors, damaging effects on hair, skin, fabrics, liners, and equipment.

Question: What are the operational costs of ionization?

Answer: The AquaSmarter System contains 5-Minerals:  Silver, Copper, Zinc, Carbon and Palladium and lasts for 1-full year which simply needs to be replaced once a year and in certain applications, once every 2 years. 

Question: How often will I have to test the water?

Answer: You will need to test the ion level every few weeks and maintain proper water balance.  The ion system is pH neutral so it will not change your water balance like chemicals do.

Question: How are copper-silver ions produced?

Answer: Copper-Silver ionization is brought about by electrolysis. An electric current is created through copper-silver, causing Negatively charged copper and silver ions to form.  Copper-silver ionization brings us back to basic chemistry, an ion or an electrically charged atom, has a Negative charge when it gives up an electron and a negative charge when it takes up an electron.  A Negatively charged ion in called a cation and a Positively charged ion is called an anion.  During ionization, atoms turn into cations or anions.  When copper-silver ionization is applied, Negatively charged copper (Cu⁺ and Cu²⁺) and silver (Ag⁺) ions are formed.  The electrodes are placed close together.  The water that is disinfected flows past the electrodes.  An electric current is created, causing the outer atoms of the electrodes to lose an electron and become Negatively charged.  The larger part of the ions flows away through the water, before reaching the opposite electrode.  Generally the amount of silver ions at a copper ion rate of 0,15 to 0, 40 ppm lie between 5 and 50 ppb.  The ion concentration is determined by the water flow.  The number of ions that is released increases, when electric charges are higher.  When copper ions (Cu⁺) dissolve in water, they are oxidized immediately to form Cu²⁺ ions.  Copper can be found in the water in free form.  It is commonly bond to water particles.

Ionized water is hexagonally shaped (like a snowflake). It is considered to be the healthiest water in the world to drink. On the other hand, pentagonally shaped water (as an example distilled water is 97% pentagonally shaped) is dead water. Placed any fish, plankton, or algae in pentagonally shaped water and they quickly die.

Ionized water also referred to living water. All electrons in water either spin to the left or the right. High speed of the left spin of electrons is considered to substantiate that the water is vital and alive. Only ionized water has this quality.  Ionized water is the only water that has a low surface tension. Surface tension is measured in dynes. This allows for greater absorption of water and nutrients into the body. Ionized water is highly positive charged. This allows the cells to efficiently transmit photons to each other. This allows productive vital cell-to-cell communication. Ionized water is thousands times more healthful to your body than any other water.

Hydrogen is the lightest element of all, and its companion element, oxygen. Atoms of hydrogen are very small; they consist of a single positively charged proton for a nucleus, and that proton is surrounded by a single electron. One advantage of being small is that the nucleus of such an atom can penetrate close to the electrons of other atoms. Hydrogen nuclei can wriggle into regions that bigger atoms cannot reach. Moreover, because there is only one electron in a hydrogen atom, the bright positive charge of the nucleus can blaze through the cloudlike electron's misty negative charge, and there is, consequently, a strong attraction for other electrons that happen to be nearby.

As for the oxygen atom, it is much bigger than a hydrogen atom. Nevertheless, as atoms go, it is still quite small compared to those of other elements, such as sulfur, chlorine, and even carbon and nitrogen. Its smallness stems from the strong positive charge of the oxygen nucleus, which draws its electron close to itself. Additionally, because it is so small and yet has a strongly charged nucleus, an oxygen atom can draw toward itself the electrons of other atoms. In particular, it can draw in the electrons of any atoms to which it is bonded.

In water, an oxygen atom is bonded to two small hydrogen atoms. The central oxygen atom sucks in the electrons of the oxygen-hydrogen links, and so partially denudes the hydrogen still further of their electrons. The oxygen atom thereby becomes oxygen rich and the hydrogen atoms become electron poor. Consequently, the oxygen atom has a vestigial negative charge (arising from its being bloated with electrons) and the hydrogen atoms acquire a vestigial positive charge because the positive charge of the nucleus is no longer canceled by the surrounding electrons (for they have been partially sucked away). The resulting distribution of charge-oxygen negative and hydrogen positive-coupled with the small size of the hydrogen atoms, is at the root of water's extraordinary properties. http://www.ionizers.org/ionized_water.html

 Question: What are the applications of copper-silver ionization?

Answer: Copper-Silver ionization is suitable for a large number of applications.  It became of interest when NASA used copper-silver ionization for drinking water production aboard Apollo space ships in 1960.  The ion generator that was used was the size of a matchbox.  Because of copper-silver ionization, drinking water could be produced safely in space without the use of chlorine.

Benefits

1 Copper/silver elements eliminate the following: With all viruses we have encountered in the testing of the system, CFG has been able to design and build a system to eliminate all viruses including E coli).
2 Ideal for those who are allergic or sensitive to standard sanitizing chemicals
3 Dramatic difference in water quality
4 Pump time for maintenance is doubled

5 Piping and valves PLC is doubled with the no corrosion factor
6 Eliminates chemical odors
7 Reduces maintenance time
8 System is environmentally friendly and completely safe
9 Provides long-lasting and constant Conditioning of water contaminates with a residual effect of one year and in some applications up to 24 months.

Benefit Summary

Copper-silver ionization affectively deactivates Legionella bacteria and bio film and it improves water quality.  Copper-silver ionization has a larger residual effect than most other disinfectants.  Copper and silver ions remain in the water for a long period of time.  Because of its local affectivity, the effect is larger than that of UV.  Copper-silver is effective throughout the entire water system, even in dead-end points and parts of the system that contain slow-running water.  Copper-silver use affectivity does not depend on water temperature.  When copper-silver is used, less maintenance to the water system is required.  Copper-silver is non-corrosive; it causes less strain on the distribution system.  Because of a decrease in the use of chemicals, the lids and pumps are not affected.  Furthermore, shower heads, tanks, and taps are not contaminated.  When copper-silver ionization is applied, there are no transport and storage difficulties.

Drawbacks:  Copper-silver affectivity depends on the pH value of the water.  At a pH value of 9, only one tenth of all Legionella bacteria are removed.  When dissolved solid concentrations are high, silver will precipitate.  This means silver ions are no longer available for disinfection.  Silver ions easily react with chlorines and nitrates that are present in the water, causing them to no longer be effective.  Some species of microorganisms can become resistant to silver ions.  They can remove metal from their systems or convert it to a less toxic product.  These microorganisms can become resistant to copper-silver ionization.  Although it is suggested that Legionella bacteria can develop resistance to copper-silver ionization, this disinfectant still appears to be effective for Legionella deactivation.  To affectively kill pathogenic microorganisms, copper and silver ions should be present in the entire water system.  When the system is used little and the water flow is quite slow, or when there are dead-end points in the system, this can causes problems for disinfection. 

Legislation for copper-silver ionization:

EU:  The European Union does not dictate any standards considering silver concentrations in the water.  Copper, however, has a maximum value of 20 μg/L, because it corrodes waterworks.  Copper concentrations should be measured in taps.  (EU Drinking water directive 98/83/EC, 1998)

WHO:  The WHO does not dictate any standards considering the concentration of silver as a drinking water disinfectant, because the organization found the available data to be insufficient to recommend a health standard.  (WHO, Guidelines drinking water quality, 3e editie)

USA:  The United States dictate’s a maximum value of 1 mg/L of copper and a maximum value of 0, 1 mg/L of silver.  (EPA, National Secondary Drinking Water regulations, 2002)

Installation options for placement

Option one

In this diagram we will illustrate the optimal positioning of the AquaSmarter/AquaSmarter Potable Water Well System.  This option will allow all the unwanted minerals and sentiment to coagulate to the Negatively charged IONS and become a heavier than water molecule and descend to the bottom of the sediment tank.  The bacteria and viruses that are eliminated will dissipate and be collected in the discharged sediment at the bottom of the tank.

AquaSmarter In-Ground Potable Water Well System Illustration Diagram

Well Installation

Diagram 1 illustrates the most common water producing wells throughout the world today.  Keep in mind that there will be minor variations regarding the pump, casing, borehole, depth, etc.  If the bore-hole is at a depth greater than 4 meters it will be beneficial to contract a well service company to assist you in the installation of the CFG System.  A typical bore-hole well consists of the following configuration.  A well will be drilled out in accordance to a water surveyor.  Once the bore-hole is complete the quality of the water and the well flow will be evaluated.  Once the well has been certified to maintain potable quality water standards and desired flow, the well will enter the ‘Completion Stage’.  The bore hole casing will be installed, this casing will consist of one of the following sizes:  5’ older wells will have this size, 7’, 8’, 10’, 12’.  The outer casing will be cemented in, and the cement will be bored out after it has set.  The next stage will be, to place the submersible pump at bottom of the casing with the AquaSmarter/AquaSmarter System secured from the top of the Platform then lowered to approximately 3-4-meters below the pump or Draw Steam.  The AquaSmarter/AquaSmarter System (tower) will need to be positioned at a minimum of fifty feet above the aquifer in so that the ions are not pulled into the aquifer..  Be sure the AquaSmarter/AquaSmarter System is lowered 3-4 meters below the submersible pump. 

AquaSmarter/AquaSmarter Potable Water Tank or Cistern Systems

Option Two:

Sediment Tank Reserve AquaSmarter/AquaSmarter Water Conditioning Systems:

In this option, we will install the AquaSmarter/AquaSmarter System directly into to the Sediment (primary) tank. In order for this to work correctly, we need to have some degree of agitation and circulation.  The AquaSmarter/AquaSmarter System will need to be placed one meter below the lowest water line point and close to the intake water flow.  Allow a minimum of twenty-four hours to the AquaSmarter/AquaSmarter System to activate.  At this point, the AquaSmarter/AquaSmarter System will initiate the production/secretion of IONS throughout the volume of water.  This process will take a matter of only a few days depending on the level of contamination the AquaSmarter/AquaSmarter System is Conditioning.  In the diagram below, it illustrates the correct configuration to install the AquaSmarter/AquaSmarter System.  The factors that are necessary to be considered are:

1. Placement: One meter below the surface water and directly underneath the in-take flow

2. Agitation of water

3. Circulation of water

4. Sediment settling or time for coagulation of heavy metals or dust particles

Summary

The AquaSmarter/AquaSmarter Potable Water Well System performs at maximum efficiency, when all the data collection is accurate and conducted by a Certified or credible laboratory.  We, at AquaSmarter/AquaSmarter require the results to be accurate in-order for us to design and build the AquaSmarter/AquaSmarter System according to each individual installation.  The AquaSmarter/AquaSmarter System has been proven to be successful at eliminating Bacteria, Viruses, Dust Particles, Heavy Metals, and deliver a quality of water that people have never experienced before.  We have been cleaning water for people to drink for the past seven years.  AquaSmarter/AquaSmarter System does not does not remove Chemicals.  In these cases we can work in conjunction with a Carbon Filtration System to remove the chemical before the AquaSmarter/AquaSmarter System ionizes the water.  The AquaSmarter/AquaSmarter Ionization Systems can be used in conjunction and provide a synergistic solution with other methods of sanitation including, chlorine, ozone ultraviolet and chemical systems for improved performance as a supplemental or dual stage method of sanitation.

The AquaSmarter/AquaSmarter System is the only system on the market today that can offer the cleaning and Conditioning of water with a residual life span of one year without the use of chemicals.  The AquaSmarter/AquaSmarter System will reduce the costs of cleaning and treating water in almost every category.  The AquaSmarter/AquaSmarter Team is a World Class Operation with a 7-Year Proven Technology.  Satisfaction and Quality are our Highest Priority in order to design and build a Water Conditioning Solution for almost any water related problem from inception to completion.

For Verification that our AquaSmarter H20-System has been Tested, “Safe for Human Consumption”, please refer to our EPA Est. (EPA Est. Number: 075702-CRI-00) as well as our 6-year History with Flamingo Beach Community of Purified ‘AquaSmarter’ Water every day (http://AquaSmarter.net/WaterConditioning.htm). 

AquaSmarter Potable Water Certification Number from the Country of Costa Rica, Ministerio de Salud de Costa Rica, Decreto: # 4582-06

We at AquaSmarter/AquaSmarter promises to provide each of our Customers with Clean, Safe, Healthy, and Affordable Water.  We again Welcome you to afford the many benefits from AquaSmarter/AquaSmarter Technology as the Future of our Success depends on yours.

United States Patent and Trademark Office

PATENTED

World Wide Patents Pending

Thank you for being an Important Part of a GLOBAL Solution

Carmen Santos, CSD

AquaSmarter International

Orders@AquaSmarter.com

Thank you for Visiting us and

Thank you Very Much for your Business.